+971 52 603 4813



our process.

Process One: Blasting

Blasting is the first step of the powder coating procedure. It means applying material (such as steel grit, garnet, etc.) on the surface with high pressure for removing all contaminations, dirt, and impurities. Blasting is by far the most efficient and environmentally friendly process of cleaning materials.

Process two: Anti-corrosion Coating

Anti-corrosion Coatings (Epoxy Primer) allow for added protection of metal surfaces and acts as a barrier to inhibit the contact between chemical compounds or corrosive materials. Epoxy Primer is recommended to all clients if products are not coated within 24 hours.

Process three: Powder Coating

Powder Coating nowadays is slowly replacing wet paint on most metals. It means spraying electrostatic deposition (ESD) on the surface of the metal. The powder is usually applied to the metal via a spray gun which electrostatically charges the powder to attract it to the grounded part.