info@barrejtech.com +971 52 603 4813

 

Metal fabrication is the creation of metal structures by cutting, bending, and assembling processes. 

 

  1.  Raw material
  2. Cutting and burning
  3. Forming
  4. Machining
  5. Welding
  6. Final assembly/ QC Inspection
 

Barrej tech Metal Fabrication specializes in Outdoor gym and play park equipment

 

  1. Metal stairs & Handrails
  2. Platforms
  3. Walkways
  4. Cat Ladders Brackets and clamps for events services
  5. Gates & Grills
  6. Outdoor and indoor steel furniture
  7. Architectural steel furniture
  8. Machinery services and many more

our process.

Process One: Blasting

Blasting is the first step of the powder coating procedure. It means applying material (such as steel grit, garnet, etc.) on the surface with high pressure for removing all contaminations, dirt, and impurities. Blasting is by far the most efficient and environmentally friendly process of cleaning materials.

Process two: Anti-corrosion Coating

Anti-corrosion Coatings (Epoxy Primer) allow for added protection of metal surfaces and acts as a barrier to inhibit the contact between chemical compounds or corrosive materials. Epoxy Primer is recommended to all clients if products are not coated within 24 hours.

Process three: Powder Coating

Powder Coating nowadays is slowly replacing wet paint on most metals. It means spraying electrostatic deposition (ESD) on the surface of the metal. The powder is usually applied to the metal via a spray gun which electrostatically charges the powder to attract it to the grounded part.

Process Four: Baking

Baking in an oven at a temperature between 160 - 240° C. The heat causes a chemical reaction that produces long molecular chains which make the coating much more resistant against environmental disturbances. It goes without saying that the materials must be clean before starting the powder coating procedure.